Durable EAS Soft Printed Bar code Labels With 45mm Length , 10.8mm Width
Printed Barcode Labels
label length 45mm ± 0.2mm
label width 10.8mm ± 0.2mm
Polystyrene/polyethylene 0.35mm thickness
Detailed Product Description
The Q001 Label provides adequate detection and very high
Low-price AM labels are available in a wide range of standard and
custom styles and are available in sheets and rolls to accommodate
retailers with source-tagging and other in-store product protection
Frequency : 58kHz
Deactivation : 100%
Operating Distance: Up to 2m (8ft) in Dual Pedestal System.
45mm ± 0.2mm
10.8mm ± 0.2mm
label thickness (excluding liner)
label thickness(including liner)
Materials of Construction
1 . Plastic housing
2 . Resonator
3 . Laminate
4 . Bias
5 . Adhesive
6 . Release Liner
plastic housing : Polystyrene/polyethylene 0.35mm thickness.
resonator(s) : Amorphous alloy material.
Laminate : Low Density Polyethylene / Polyester /Polyethylene
Bias : Semi-hard magnetic material
Laminate : Low Density Polyethylene/Polyester 0.08mm
Adhesive : Double-coated acrylic-based adhesive
Minimum peel strength:≥15 N/25mm
release liner : Double-sided, silicon-coated Kraft liner 0.12mm
Shelf Life: Two year from date of manufacture when Labels are
stored between15-32 (60°F -90°F) and 30-80%RH.
Temperature: Maximum storage temperature not to exceed 50 (122°F)
for 96hours at 80% RH.
Humidity: Unaffected by 80% humidity at 50(122°F), up to 96 hours
Place in least conspicuous location.
Do not cover warnings, expiration dates or important consumer
It is recommended that the surface to which the label is applied be
clear and free of all dirt, grease, oil, etc.
Ambient magnetic field of labeled product greater than 100mG may
result in reduced label performance.
Label not to exceed temporary magnetic field exposure greater than